CMC Jack Plates

Find the outboard starter you need for your motor by clicking here.
  Hydraulic Jack Plate, Manual Jack Plate, Static Set back Plate  
*Try our NEW PL-65 High Speed Jack Plate Unit. It delivers twice the stroke speed as our standard lift at the same low price.*

Hydraulic Jack Plate, Transom Jack Specifications
Pl-65-HS jackplate
CMC #65302
PL-65 High Speed Jack Plate
$822.25

Full Stroke in 8 seconds!

PL-65 High Speed Hydraulic Jack Plate has 5 ½" of setback. Made for V-6 and smaller marine motor applications. Once the unit is mounted, it will raise the transom motor 5 inches. Made of ¾" and ½" 6061 T6 alloy aluminum extrusions. Fastened with stainless steel fasteners. A TOTAL OF 8" OF POSSIBLE ADJUSTMENT!



SEE: PL-65 High Speed Hydraulic Jack Plate 5 ½" Setback w/ gauge 65301
$822.25
hydraulic jackplate
CMC# 65201
PL-65SS Jack plate for V-8 motors
$1,919.87

PL-65 Hydraulic Stainless Steel Jack Plate is used for V-8 and racing marine motors. Once the unit is mounted, it will raise the engine 5 inches from the transom. Ready with stainless steel motor rails. Includes optional lift gauge. All mounting hardware is included.


Take a look at the wiring for the PL-65SS (Stainless Steel).
$1,919.87
hydraulic jackplate
CMC #61002
PL-65 10" Setback Hydraulic Jackplate
$892.40

Hydraulic Jack Plate 61002 for boat motor has 10 inches of setback. Made of ¾ and ½ inch 6061 T6 alloy aluminum extrusions. Fastened with stainless steel fasteners. Great for fresh or salt water use. All mounting hardware is included.

SEE: PL-65 Jackplate 10" setback with gauge 61001


Take a look at the wiring PL-65 Jack Plate 10" Setback.
$892.40
hydraulic jackplate
PL-65 Hydraulic Jack plate #65002
$822.25

PL-65 Hydraulic Jack Plate #65002 for marine motor has 5 ½ inches of setback and 1 ½" of adjustment on the transom bracket. Made for V-6 and smaller outboard motor. You can buy it with optional lift gauge and power dial lift control. All mounting hardware is included. It can also be purchased with stainless steel motor rails, Model PL-65SS(Stainless Steel) (for V-8 engine with 300 HP MAX).

SEE: PL-65 Hydraulic Jack plate with gauge #65001


Take a look at the wiring for the PL-65.
$822.25
Manual Jack Plate Specifications
return to top
manual jackplate
CMC #65212
ML-65 SS
$1,230.50

ML-65 Stainless Steel Jack Plate with 5 ½ inches of setback. Constructed for V-8 motors and racing applications with 300 HP MAX. Gives 5 inches of vertical travel to achieve its full potential. Equipped with stainless steel motor rails. Must be adjusted manually when outboard is stopped. All mounting hardware is included.

$1,230.50
manual jackplate
CMC #61012
Manual Jack plate
$330.20

Manual Jack Plate with61012 10 inches of setback. Made for V-6 and smaller boat engines. Gives 5 inches of vertical travel to get a full potential of your boat. Has high strength 6061 extruded aluminum alloy mounting bracket lets you easily raise or lower your outboard motor w/ 1-1/8" wrench. All mounting hardware is included. Designed to fit standard B.I.A. bolt pattern without drill holes or making modifications in the transom engine.

$330.20
manual jack plate
CMC #65012
Manual Jack Plate
$317.20

This Manual Jack plate for outboard motor has 5 ½ inch of set back from transom. Provides 5 inches of vertical travel to achieve its full potential. Should be adjusted manually when outboard is stopped. Rated up to V-6 and smaller outboard motors. All mounting hardware is included.

$317.20
manual jackplate
CMC #40012
2 piece Manual Jack
$208.00
2 piece Manual Jack Plate with 4 inch setback is made for V-6 and smaller outboard motors.
Two piece design has 5 inches of slot adjustment at transom motor mounting bracket and 1 ½ inch at motor.
All mounting hardware is included.
$208.00
manual jackplate
CMC #55012
2 piece Manual jack plate
$208.00
2 piece Manual Jack Plate with 5 ½" setback is used for V-6 and smaller outboard motors.
The two-piece adjustable manual plate has 5 inches of slot adjustment at the motor mounting bracket and 1 ½ inches of adjustment at the transom bracket.
All mounting hardware is included.
$208.00
Static Setback Plate Specifications
return to top
static setback
CMC #90012
9" setback static plate
$339.60

9 inch setback static plate has 1 ½" of adjustment at the boat transom and 1" of adjustment on the motor bracket.
Made for V-6 and smaller outboard motors.
All mounting hardware is included.
$339.60
static setback
CMC #70012
7" setback jack plate
$339.60
Static jack plate with 7 inches setback has 1 ½ inch mounting adjustment at transom and 1 inch of adjustment at the engine.
Constructed for V-6 and smaller outboard engine.
All mounting hardware is included.
$339.60
static setback
CMC #65213
2 ½ inch setback jackplate
$111.80
2 ½" set back static plate for motor has 1 ½" of adjustment at the transom motor.
Most commonly used in conjunction with manual or hydraulic 5 ½ inch setback transom jack to give a total of 8 inches of setback jack plate.
Made for V-6 and smaller boat motors.
All mounting hardware is included.
$111.8
static setback
CMC #50012
5" vertical extension static jack
$150.00
5 inches vertical extension jack plate allows boat motors to be mounted 5 inches higher than the standard mounting on the transom.
Another application includes mounting the 5 inch vertical extension on the hydraulic Jack Plate to lift the motor higher on shallow running marine vessel that are equipped with tunnel extensions.
It is a must for conversion from prop to jet drive.
Ideal for V-6 and smaller outboard motors.
$150.00
washer plate
CMC #20022
Top Transom Washer Plate
$30.38
Remove bolts biting into jack plate of marine vessel.
More evenly distributes loads due to high performance of outboard. 12 7/8 hole center to hole center.
SEE: Bottom Washer Plate #20032
$30.38



Find Us on Facebook! Bookmark and Share